- -$20.00
384kHz/32Bit PCM5102A DAC, I2S input, 4uV Low Noise Regulator
$39.95
$19.95
Save $20.00
No tax
- USB to high quality optical SPDIF output(with FIFO reclock) and analog RCA output(2V rms),
- High quality Gold plated Type C USB socket, USB 2.0/3.x compatiable,
- OEM are welcome, large discount for qty order
Full of Detail Sound
The combo option includes XMOS PCB and PCM5102A DAC everything pre-assembled. It can be used immediately and USB powered from the computer.
The bare pcb option includes PCM5102A DAC PCB with all SMT component soldered, thru-hole component are not included.
Features:
1) 384KHz/32Bit PCM5102A DAC Chip (Market-leading Low Ouf-of-Band Noise from Texas Instrument and support loads down to 1kΩ)
2) Low noise linear power regulator (use of decade old LM317/1117 regulator is kidding for audiophile)
3) The SPDIF output signal is connected directly from the XMOS pcb, jitter eliminated by the well known Flip Flop FIFO reclock circuit.
3) Prefect solid ground plane (a must for high speed digital circuit), No Via in active circuit (via inductance always create jitter problem)
5) 0.1% Low noise thin film resistor and C0G Capacitor sourced from Digikey USA (guarantee no fake product from China)
6) Gold plate I2S input connector and six GND return path dedicated for each I2S signal(lowest contact resistance and highest signal quality)
7) With Low Latency Filter selectable, De-emphasis on/off control, and pre-allocated space for diyier to install extra low ESR Tantalum capacitor for each DAC power supply pin.
8)Diyer can easily tune for their favourite sound with other passive Low pass filter RC combination with the pre-allocated 5mm lead space film capacitor footprint space
9) Can connect to our XMOS USB to I2S module directly
10) Compact size 50mm x 50mm
11) PCM5102A Integrated High-Performance Audio PLL can Generate MCK Internally with BCK as reference. i.e. i2s only need three wire bck, lck and data to connect when used with source without MCK such as Raspberry Pi.
Windows 7/8/10 Driver is available to download from our website:
*Latest version of Windows 10 already includes built-in USB audio driver, this device can be used immediately without installation of any driver.
Specification:
1) I2S Input (MCLK, LRCK, BCK, DATA, GND)
2) Output level: 2.1V RMS
3) Resolution/Sampling Rate: Up to 32bit/384KHz
4) Supply: Regulated or Unregulated 4-5.5Vdc/48mA+output loading
You might also like
Customers who bought this product also bought:
- USB to high quality optical SPDIF output(with FIFO reclock) and analog RCA output(2V rms),
- High quality Gold plated Type C USB socket, USB 2.0/3.x compatiable,
- OEM are welcome, large discount for qty order